Find a Control4, Crestron, Lutron or Savant Dealer in the UK
How UK dealer networks for Control4, Crestron, Lutron, Savant, Loxone, KNX and Rako work, how to check a dealer is authorised, and what to ask.
Control4, Crestron, Lutron and Savant are not sold in shops. You buy them through an authorised dealer, who designs the system, programmes it and supports it for years afterwards. So choosing a dealer matters as much as choosing the brand.
Hale & Vane is an introduction service. Tell us the brand and your area, and we pass your enquiry to one authorised, vetted dealer. They quote and contract with you directly. It is free to you; the specialist pays us for the introduction. We are independent and have no partnership with any manufacturer.
How UK dealer networks work
Professional smart-home brands sell through trained, authorised firms. Each manufacturer runs its own programme. Dealers complete training, buy through official channels and get access to the design and programming software.
Most programmes have tiers or certification levels. Higher tiers usually mean more training, more completed projects and closer support from the manufacturer. Individual programmers often hold their own certificates too.
The dealer does more than fit hardware. A good one will:
- Design the system around your home and how you live in it.
- Programme the scenes, keypads, schedules and interfaces.
- Support it afterwards, with updates, fixes and changes.
Why your system is tied to a dealer
Professional systems run on a project file built by the dealer. On some platforms, such as Control4, your system is also linked to the dealer’s account with the manufacturer. That is how the dealer pushes updates and handles faults remotely.
This is normal and sensible. But it means the dealer relationship lasts as long as the system. Ask early who will hold the project file, and whether you can have a copy.
Control4 (Snap One)
Suits: most larger family homes that want one app for lighting, AV, climate and security, at a lower cost than Crestron.
Verify: use the dealer locator on the Control4 website, then ask the firm to confirm its current status in writing.
Ask: how many Control4 homes they support now, who programmes in-house, and how remote support works.
Crestron
Suits: large or complex homes, especially those with many AV zones and demanding video distribution.
Verify: use Crestron’s find-a-dealer tool and ask which of the team hold Crestron programming certificates.
Ask: whether programming is done in-house or contracted out, and whether you will receive a copy of the program files.
Lutron (HomeWorks, RadioRA, Ketra)
Suits: any home where lighting and shading matter most. HomeWorks covers the largest houses. RadioRA suits smaller homes and retrofits. Ketra adds tunable, natural white light.
Verify: Lutron’s dealer locator lists authorised firms. HomeWorks and Ketra need specific Lutron training, so ask which systems the firm is certified for.
Ask: for a recent HomeWorks or RadioRA job of similar size, and how they work with your lighting designer.
Savant
Suits: Apple households that want a polished, simple interface across the home.
Verify: check Savant’s dealer locator and ask for written confirmation of authorised status.
Ask: which third-party systems they have integrated, since Savant support for some alarm panels and thermostats is narrower.
Loxone (Partner)
Suits: new builds and major renovations, where wiring can be designed in from the start, often at a lower cost.
Verify: Loxone lists its Partners by area on its website. Ask which Partner level the firm holds.
Ask: how much of the installation they do themselves and how they hand over documentation.
KNX (certified integrators)
Suits: new builds and long-life homes where freedom from any single vendor matters. KNX is an open international standard.
Verify: look for KNX Partner certification. The KNX Association publishes a partner search, and certified integrators can show their certificate.
Ask: which brands of KNX device they use, and whether you will receive the full ETS project file.
Rako
Suits: homes wanting capable British lighting control, often as a lower-cost alternative to Lutron.
Verify: use the installer finder on the Rako website and ask the firm to confirm its status.
Ask: whether they install wired or wireless Rako, and how it links to any wider control system.
How we help
Searching for a dealer in the UK often turns up overseas firms and forum threads. We make it simpler.
- Tell us the brand, or the result you want, and your area.
- We check the enquiry and pick one authorised, vetted dealer who suits the job.
- They contact you, quote and contract with you directly.
Not sure which brand fits? Read our control platform comparison or our lighting control guide. Wondering about budget? See what a smart home costs. The full process is on how it works.
Your dealer has gone: owners of an existing system
Firms close, retire or move on. If your Control4, Crestron, Lutron or Savant system has lost its dealer, it can still be supported.
A new authorised dealer can take the system over through the manufacturer’s transfer process. If the old project file is lost, they may need to rebuild some of the programming. The sooner you act, the easier it is.
See support for existing systems and our wider ongoing maintenance guide. If you want help with Wi-Fi or the network underneath, see secure networks.
A note on brands
Brand names on this page are used only to describe products. Hale & Vane is not endorsed by, affiliated with or a partner of any manufacturer named here.
Tell us the brand and your area, and send an enquiry for a free introduction to one authorised dealer.
Questions we are often asked
How do I find an authorised Control4 dealer in the UK?
Start with the dealer locator on the Control4 website, then ask the firm to confirm its status in writing. Or tell us your area and we will introduce one authorised, vetted Control4 dealer. It is free to you.
Can any installer work on a Control4 or Crestron system?
Not properly. The design and programming tools are only issued to authorised dealers and trained programmers. An unauthorised firm can fit hardware but usually cannot programme, update or support the system.
Can I change dealer if I am unhappy or mine has closed?
Yes. Each manufacturer has a route for moving a system to a new authorised dealer. The new firm handles the transfer with the manufacturer and, ideally, takes over the project file from the old one.
Are you a Control4, Crestron or Lutron dealer?
No. Hale & Vane is an independent introduction service. We are not a dealer and have no partnership with any manufacturer. We introduce you to one vetted specialist who is authorised for the brand you want.
Does it cost anything to be introduced to a dealer?
No. The introduction is free to you. The specialist pays us a fee if we introduce you, and you contract with them directly.
Tell us what you need
Use the short form or call us. We reply within one working day and, if it suits, pass your enquiry to one vetted specialist. Free to you.